Why is water running off my lawn?

Your sprinklers are putting water down faster than the soil can take it in. Colorado State University’s PlantTalk says heavy clay absorbs only about a quarter inch an hour, while spray heads can apply around 1.5 inches an hour. The fix is “cycle and soak”: split one long run into two or three shorter runs with a break between them.

How to set up cycle and soak

  1. Turn on the zone and time how long it takes for water to start running off. That’s your longest single run.
  2. Split the total run time into two or three cycles of that length or shorter.
  3. Leave about an hour between cycles so water soaks in.

CSU’s example for clay with spray heads: about a quarter inch per cycle (8 to 10 minutes), two or three cycles, for a total of half to three-quarters of an inch.

Other causes

  • Compacted soil. Core aerate once or twice a year.
  • Slopes. Put them on their own zone with shorter cycles.
  • High pressure. A mist cloud around heads means pressure is too high; it wastes water and drifts.
  • Heads spraying pavement. Adjust them.

Common mistake

Running one long cycle to “really soak” a clay lawn. Most of that water ends up in the gutter.

Sources

Still have a question about your garden?

Ask Keith