Look for patterns: brown or dry spots in the same places, or soggy areas, usually mean uneven coverage. The easiest way to check is a catch-can test. Set straight-sided cans around a zone, run it for 15 minutes, and compare how much water each can collected.
How to do a catch-can test
- Place four or more identical straight-sided containers around the zone, between the sprinkler heads.
- Run the zone for 15 minutes.
- Measure the depth of water in each can. Big differences mean uneven coverage.
- To get your watering rate, combine the water from four cans into one and measure its depth in inches. That number is roughly how many inches per hour the zone applies.
Calculating run time
Run time (minutes) = inches of water needed × 60 ÷ inches per hour.
Example: if your zone applies 1.5 inches an hour and the lawn needs 1 inch a week, run it about 40 minutes a week, split across your watering days.
Common causes of uneven coverage
- Heads spaced too far apart. CSU says head spacing should be no more than the throw radius.
- Low pressure, where droplets fall short
- High pressure, which creates mist that blows away
- Clogged or broken nozzles, or a rotor that’s stopped turning
- Wind and hot south- or west-facing exposures
Free help
Some Colorado water providers, communities and CSU Extension offices offer landscape water audits.
Common mistake
Running every zone longer to green up one dry spot. Fix the head that’s causing it instead.
Sources
- Operating and Maintaining a Home Irrigation System, CSU Extension
- Efficient Lawn Watering, PlantTalk Colorado
- Watering Efficiently, CSU Extension
