Most tree roots are shallow, so water the top 12 inches or so of soil across a wide area. Colorado State University Extension says most roots grow in the top 12 inches in clay or compacted soil, and they spread two to five times wider than the canopy. Water when the top 4 to 6 inches are dry, giving about 10 gallons per inch of trunk diameter, or 1 to 2 inches of water over the root zone every two weeks in the growing season.
How much water a tree needs
| Tree trunk diameter | Water per watering (10 gallons per inch) |
|---|---|
| 2 inches | 20 gallons |
| 4 inches | 40 gallons |
| 8 inches | 80 gallons |
Measure the trunk about 6 inches above the ground for small trees.
How to water
- Water at and beyond the dripline, not at the trunk. The roots that take up water are spread out.
- Soaker hose or drip tape: lay it in a circle at the dripline and let it run for a long time; it can take hours to apply an inch.
- Hose and sprinkler: place it just outside the dripline. Expect 30 to 60 minutes per inch.
- Lawn sprinklers can water trees in turf, with an extra cycle a couple of times a month in summer.
- Skip deep-root needles. CSU says they put water below most roots. If you use one, don’t push it more than 8 inches deep.
How to check
Push a slender screwdriver into the soil inside and outside the dripline. If it slides 6 to 8 inches in easily, the tree doesn’t need water yet.
Common mistake
Watering only at the base of the trunk. The roots that need water are mostly farther out.
Sources
- Watering Mature Shade Trees, CSU Extension
- Fall and Winter Watering of Plants and Trees, CSU Extension
- Watering a Home Landscape During Drought, CSU Extension
