Your sprinklers are putting water down faster than the soil can take it in. Colorado State University’s PlantTalk says heavy clay absorbs only about a quarter inch an hour, while spray heads can apply around 1.5 inches an hour. The fix is “cycle and soak”: split one long run into two or three shorter runs with a break between them.
How to set up cycle and soak
- Turn on the zone and time how long it takes for water to start running off. That’s your longest single run.
- Split the total run time into two or three cycles of that length or shorter.
- Leave about an hour between cycles so water soaks in.
CSU’s example for clay with spray heads: about a quarter inch per cycle (8 to 10 minutes), two or three cycles, for a total of half to three-quarters of an inch.
Other causes
- Compacted soil. Core aerate once or twice a year.
- Slopes. Put them on their own zone with shorter cycles.
- High pressure. A mist cloud around heads means pressure is too high; it wastes water and drifts.
- Heads spraying pavement. Adjust them.
Common mistake
Running one long cycle to “really soak” a clay lawn. Most of that water ends up in the gutter.
Sources
- Efficient Lawn Watering, PlantTalk Colorado
- Watering Efficiently, CSU Extension
- Operating and Maintaining a Home Irrigation System, CSU Extension
- Irrigating the Vegetable Garden, CSU Extension
- Soil Compaction, CSU Extension
